“ Quickly, Easily and Safely ‘HACK’ Your Car To Run Better and Faster — Also Save Money and Time On Repairs By…
Performing Advanced OBD Diagnostics, Reading/Clearing Faults… and Optimize Performance, Fuel Efficiency and Engine Power — Just Like $250p/h Professional Mechanics Would Do… ”
TOAD-Pro car diagnostics software can dig deeper into car’s OBD2 fault system than high-end $1,000 OBD professional diagnostic scan tools. Software Updated:
What is TOAD®
(TOTAL OBD & ECU Auto Diagnostics™)?
TOAD® is a complete professional OBD2 scan tool software for ELM327 interfaces that lets you perform powerful and comprehensive health and performance checks on your car – like never before possible.
It will show you in precise detail what’s going on inside different systems via visual, easy-to-understand customizable graphs.
You can also make optimized performance changes by editing, tuning and reprogramming cars ECU chip data (brain that controls how the car runs). This is typically called “car tuning”.
We make this possible for you by including 17 sensational car-manufacturer-approved OBD2 software — that will connect to your vehicle as seen below:
It’s simple as hooking up ELM327 (USB, Bluetooth, WIFI) – and loading up TOAD OBD2 Reader/Scanner Software.
What’s more, TOAD will instantly show you existing problems and DTC ‘check engine’ faults often associated with the concerning “malfunction indicator light” (MIL) on the dashboard.
But our OBD diagnostic tool goes beyond traditional OBD2 scan tools or handheld OBD code readers. TOAD will tell you where the ‘check engine’ related fault is LOCATED – and how to fix it. This is something you’ll only find possible at mechanics. Now you’re totally in control!
In short, this kind of thorough OBD tool capability could save your car from potential future failures — ultimately saving you thousands of lost dollars, time and frustration before the vehicle brakes down unexpectedly. Worse yet, leaving you or your customer stranded!
How is TOAD Better?
TOAD on average extracts 50-90% more DTC ‘check engine’ fault codes and critical operations data — than Android/iOS apps (like Torque, OBD Car Doctor, DashCommand, ScanMaster, EOBD Facile), or common hand-held OBD2 scan tools.
This is because TOAD is constantly improved by finest car engineers and technicians responsible for moving auto-industry standards forward.
Bottom line: This is the SAME type of software that’s usually ONLY reserved for highest rated, registered and acclaimed car repair shops, manufacturers, serviceman and mechanics — which they pay upwards of $3,000 to obtain. And it’s now available to you at fraction of the cost and with same capabilities as you’ll see below.
For example — TOAD OBD2 software allows you to:
- ✓ Perform a thorough health-check on your car
- ✓ Diagnose and present common problems
- ✓ Tune/edit any cars ECU data values (for home car enthusiasts and/or for your customers if you own a car business)
- ✓ “Hack” your car’s performance
- ✓ Optimize fuel efficiency
- ✓ Build custom dashboards/charts/graphs/gauges with live data (can also save as .csv)
- ✓ Reveal and fix problems that mechanics usually charge $250+ p/h for
- ✓ Analyze Dyno / Dynamometer and Horsepower/HP & Torque
- ✓ Discover how fast your car is with 0-60 speed timings — more accurate than just using plain old GPS
- ✓ Comprehensive CO2 emissions readout
Supports 9 Modes of data:
-
- * Mode 1 – Analog/Digital Gauges (160/215 Generic PIDS)
- * Mode 1 – List View (220 Generic PIDS)
- * Mode 2 – Freeze Frame Data
- * Mode 3 – Read Current Faults
- * Mode 4 – Clear Faults
- * Mode 5 – O2 Sensor Test Result (Non CAN Bus)
- * Mode 6 – On-board Test Result
- * Mode 7 – Read Pending Faults
- * Mode 8 – Evaporative System Leak Test
- * Mode 9 – VIN, Performance Tracking Data, ECU Name, Calibration and Verification ID
- * Mode A – Read Stored Faults
In addition to software’s help — you’ll also get comprehensive step-by-step manuals that’ll save you time, money and frustration by quickly revealing the vehicles fault code error, it’s meaning, where the problem is located… and how to fix it using the most cost-effective way.
Is This OBD Diagnostics Software Right For Me?
TOAD® is suitable for home car owners who want to save hundreds of dollars by doing it themselves. Or for professional car mechanics/service shops that need the latest cutting-edge detection, reading and ECU car chip tuning software.
What’s more — we offer unlimited and lifetime personal technical support, provided by experienced car mechanics. This to ensure that you make maximum use from TOAD software for your vehicle(s).
You’ll be guided by expert step-by-step, simple-to-follow advice on anything that has to do with car repair, OBD diagnostics, ECU chiptuning/programming and 3rd party service recommendations.
We breathe and live this stuff every day! So feel free to contact us.
Eitherway — hopefully you’ll start to notice as you keep reading below that we’re authentic car experts — and the software you’re about to own is absolutely world-class.
Questions and Answers
|
CHECK 1: Ensure the vehicle (any brand) complies with below dates in country you live.
|
Downloadable software are divided into 4 categories:
- OBD II (also called OBD 2) Software
- OBD I Software
- ECU Car Tuning and Editing Software
- Other: Manuals, Emission Testing, Radio Decryptors, ECU Map Files
We no longer offer ELM327 Connectors at TOAD checkout — because they can be found at lower cost on Amazon, and of equal quality. Even better, if it doesn’t work, Amazon gives 100% money back refund, including shipping cost. So there’s less risk on your part. Buy Connector From Amazon Here.
All you need is: Any Laptop with Windows. All TOAD OBD software have been tested on Windows (32/64 bit) and support: XP, Vista, 7, 8, 10, 11+. Software supports these languages: English, Czech, Dutch, French, Greek, German, Italian, Polish, Portuguese, Serbian, Spanish
MAC Support: All TOAD software is built for Windows. So you will need Windows on your MAC computer via either Boot Camp or Virtual machine.
Linux Support: Not supported.
TOAD OBD Software Features and Benefits…
Clear your Check Engine Light:
Don’t waste your time and money going to a mechanic just to find out why your check-english light in on. A mechanic will typically charge you $75 for this simple diagnostic procedure. Using our scan tool, you could do it at tome at your convenience, without the frustration of going to the mechanic only to find out your petrol/gas cap was loose.
Pass Emissions Testing:
Is it time of your vehicle to get an emissions test? Most status in USA and other countries now do their testing through the OBD-II port. Our T.O.A.D scan tool package will let you to check your own vehicles emissions status before you go wait in line to pay for the test. This way you can be 100% confident it’ll pass!
 |
Supports many older OBD-I and all new OBD-II cars. Can also read modern vehicles with encrypted ECU’s. |
|
Supports multiple protocols (controller modules) including:
|
|
Supported OBD protocols:
|
|
Monitor real time data (while car is moving or when ignition is ON) like: Engine Temperature, O2 Value, RPM, Speedometer, LAC Value, Battery Voltage, Ignition Angle, etc… |
|
Analyze Fault Codes and get Solutions (Comprehensive OBD2 Code Analysis) |
|
ECU Chip Tuning, Correction, Remapping |
|
ECU Map Editor |
|
Contains 14,000+ optimized car ECU map files. Total Value: $28,500 |
|
Built-in database of over 15,000 fault code definitions (generic and manufacturer-specific codes for engine/transmission) |
|
Oxygen Sensor test results tab |
|
Full database built-in of generic fault code definitions. |
|
Configure your sensors’ ranges, scaling value, audible alert triggers, units, and sampling rate |
|
Reset or Turn-off Warning & Service Lights |
|
Increase Your Cars Brake Horse Power BHP HOT! |
|
Access Vehicles Electronics Enhanced OBD |
|
Decode Car Stereo Security Code. |
|
Reset Engine Management Light |
|
Clear trouble codes and turn off the MIL (“Check Engine” light)  |
|
Check Transmission System |
|
CAL ID and CVN decoding |
|
Recording and Playback of Sensor Data. |
|
Read identification: Displays complete identification of control unit. EG: part number, software/hardware version, manufacturer, etc… |
|
You can record and playback log files in real time (1ms logging accuracy). |
|
You can save and load your log files for offline analysis. |
|
Read freeze-frame data. With Freeze Frames you will be able to retrieve a “snap-shot” of OBD2 sensor data when your ECU stores trouble codes. |
|
Don’t wait until you have a problem with your vehicle. Use TOAD’s Data Logger to record healthy engine parameters and use that data to help spot problems in the future. |
|
Alerts feature produces an audible warning when a parameter value (coolant temperature, RPM, etc) goes outside normal operating range. |
|
The Vehicle Manager can keep track of multiple vehicles and owners simultaneously. |
|
No restrictions on how much data you can log and for how long |
|
English and Metric (SI) unit measurement systems supported. |
| Export with real-time stamps for easy correlation with external data logs. | |
|
View all 11 Inspection/Maintenance systems and Mode 6 data |
|
Read the vehicle’s diagnostic trouble codes, live vehicle sensors (including wide-band O2 sensors), actuate bi-directional controls, reset adaptations, and view inspection/maintenance system test results to quickly determine what service the vehicle requires. |
|
OBDII Shell Terminal |
|
Fast Update Refresh Rates. Older cars will do between 4 – 6Hz with generic OBD 2. Later model vehicles that use CAN will show between 6 – 16Hz with generic OBD2. |
|
Continuous real time digital/graphic display of up to 90 Pids of power train data. |
|
Software has automatic discovery of correct COM port and factory set baud rate of scan tool. Eliminating manual time-consuming configuration of software. It’s install-and-ready! |
|
Read current Petrol/Gas//Diesel fuel consumption. (Liters per 100km/h, Miles per Gallon, Liter per hour, etc). |
|
Compatible with 12/24 Volt batteries. |
|
Read exact fault/condition of DPF (Diesel Particulate Filter) & EGR (Exhaust Gas Recirculation) — so you know what and how to fix it. |
|
DPF and EGR regeneration. Regenerate, remove or disable DPF and/or EGR condition. This is crucial for all Diesel vehicles. |
|
Actuator Function: Let’s you activate various vehicle components into test mode to verify they’re actually working properly on physical level (not just what sensor picks up). |
How Is TOAD Different from Other Car Diagnostic Packages?
TOAD is the premier “manufacturer-approved” all-in-one scan tool for DIYers and mechanics. We’ve analyzed hundreds of tools to integrate the best features into one package, ensuring you have every capability found in top-tier diagnostic hardware.
1. Complete 2-in-1 Diagnostics & ECU Remapping
Most tools only offer OBD scanning (diagnostics) or ECU remapping (tuning). TOAD does both, allowing you to identify faults and modify engine maps, fuel injection, and performance parameters in a single application.
2. Full Access to Car-Specific OEM Parameters
Standard scanners often only read generic OBD codes, missing 50% of a vehicle’s data. TOAD includes manufacturer-specific codes and parameters, giving you the same deep-level control over the ECU as an original dealership tool.
3. Step-by-Step Repair Manuals & Guides
TOAD includes thousands of pages of structured repair manuals, schematics, and PCB layouts. It doesn’t just find the fault; it shows you the probable cause and the exact solution for nearly any car model, saving you time and expensive repair bills.
What is Your Investment for Total Vehicle Control?
For the Professional Mechanic:
A professional-grade OBD scanner with constant updates usually starts at $3,000. If you want chip tuning and ECU reprogramming, you’re looking at an investment of over $25,000 – often for a single software that might fail on certain models.
TOAD-Pro gives you a suite of multiple applications. This redundancy is your “fail-safe,” ensuring you can connect to, diagnose, and tune almost any vehicle that rolls into your shop.
For the Home Car Owner:
The average dealership charges $250/hour just to plug in a scanner. Over the life of your car, you’ll easily spend $20,000 on mechanics just to keep it running.
TOAD-Pro slashes those costs by 50-80%. By knowing exactly what’s wrong before you talk to a dealer, you gain the power to negotiate and avoid being overcharged for unnecessary parts.
You get the world’s most powerful OBD/ECU diagnosis and remapping package – not for thousands, but for a fraction of the savings from your very first job.
One-time Investment: $197 $77
Includes Lifetime Support & Updates.
GET INSTANT ACCESS TO TOAD-PRO NOW
Start diagnosing and tuning in the next 5 minutes.
What Others are Saying About TOAD…
Of course, if you’re skeptical for any reason, I’d like to make this a completely risk-free offer…
100% “Better-Than-Risk-Free” 1-Year Money Back Guarantee
With 15+ years in the industry, we’ve vetted every OBD2 tool on the market so you don’t have to.
We built TOAD by combining the most powerful scanning technologies into one professional-grade solution. It is designed to be the most accurate, reliable, and compatible software available today — backed by our lifetime technical support.
We are so confident in TOAD’s performance that we invite you to put it to the test for one full year. If it doesn’t save you significant time, money, and frustration with your vehicle repairs, simply email us. We will issue a 100% refund on the spot, no questions asked.
(Note: Licenses are remotely deactivated upon refund.)
Here’s 5 Good Reasons to Own TOAD Today…
Summary of What You’ll Get When You Place Your Order Today…
Yes! I understand when I place my order now — I’ll get INSTANT download access to TOAD software in my private online membership. USB/Bluetooth connector can be purchased separately on Amazon.
Inside the TOAD Online Membership, you’ll find:
- Advanced, cutting-edge OBD software that only the highest rated and acclaimed car repair shops, manufacturers, serviceman and mechanics use. Software is easy and straightforward for any inexperienced home user. Software also contains help files on how to use and operate.
- Manuals that cover car models and their fault codes. Including their probable causes, their locations, and their solutions.
- Your software is registered with a unique License Code for support purposes and registration of software.
Retail Price: $197.00
Available for a Limited Time at $77
Price is temporarily lowered because we’re doing a price marketing test during this month May March. Get TOAD today at $120 off while this lasts…
I urge you to take action right now and grab this complete OBD2 scanner package before we raise the price back to $197.00.
It’s discounted for a limited time because we’re currently doing a marketing test at $77 vs. $197.
Trust me, you won’t want to miss out on this one.
Sincerely,
Alex Eisenberg
Former Lead ECU Software Programmer and
Car Engineer in Sydney, Australia.
P.S. Software updates are free for life. Meaning you’ll always be up to date with new car releases. And never be stuck because you can always rely on our lifetime support.
P.P.S. Remember, I’m putting all the bets and risk entirely on me. Because I’m gladly covering you with a unconditional, fair and honest 1 year money back guarantee. Meaning if TOAD OBD2 software doesn’t help you or you’re not satisfied with it for whatever reason —simply contact us and we’ll help you out.