Knowledgebase
How to Install Galletto 1260 to Windows
Posted by Alex E. on 24 June 2015 09:05 PM
vag-com kkl usb cable
Galletto 1260 Chip Tuning Cable

This article will guide you how to correctly install Galletto 1260 USB cable drivers on Windows.

 

STEP 1: Download and Install Galletto 1260 Tuning Software

Download and install official Galletto 1260 software here.

 

STEP 2: Install Drivers

(Connect cable to USB port on your computer.)

Go to Control Panel.

  • Windows Vista/7/8/10: Control Panel » System » Device Manager
  • Windows XP: Control Panel » System » "Hardware" tab » Device Manager

 

Expand "Other devices" or "Ports (COM & LPT)". Under them you will see either "USB Serial Port" or "EOBD2" or another different name that only shows up when cable is plugged in.

Whichever it is, right-click on it and choose: Update Driver Software (see below example pic)

Galletto 1260 drivers

Then Browse to the folder where you installed Galletto 1260 in Step 1. (see below example pic)

Galletto 1260 drivers

 

That's it!

When you click "Next", Windows will auto-install all drivers. If it's successful, then you can connect cable to your car, and connect to car via software.

(88 vote(s))
This article was helpful
This article was not helpful


Comments (0)

Phone: (+61) 401 605 241
Address: PO Box 1315, Byron Bay, NSW 2481, Australia

facebook-social linkedin-social youtube-social

Copyright © , TotalCarDiagnostics.com, All Rights Reserved.

sae memberNRMA Approved
TRUSTe Certified Privacy Seal