ELM327 OBD2/OBDII Bluetooth Car Diagnostic Interface (Code Reader/Scanner Tool)
“ Tired of Cheap, Unreliable, Incompatible Clones?
FINALLY! This 100% Genuine ELM327 Bluetooth Car Scanner Is Meant To Be Your ULTIMATE, Reliable, Speedy, Compatible and Safe Universal Vehicle Companion for All Present and Future Diagnostic Needs... ”
(Works on any version of Windows, MacOS — and any OBD app on Android. For Apple devices, use WIFI version.)
CAUTION: This is genuine v2.1 ELM327 Bluetooth scanner that uses Elm Electronics firmware. This is NOT a clone as is sold 99% of cases on eBay. How do you know it's a clone? It'll have these version numbers: v1.4a, v1.5, v1.5a. Also virtually all v2.1 on eBay are clones.
SCAM WARNING THAT 99.9% OF BUYERS DON'T KNOW: Did you know that 99% of those cheap ELM327's on eBay (usually under $15) actually support half the data compared to High quality, genuine chip counterparts. Example, cheap eBay/Alibaba/AliExpress clones will NOT display or WRONGLY display data for: EVAP, O2 and HO2, B1S1 Lambda data parameters. While Total Car Diagnostics ELM327 cable fully shows their data in absolute accuracy. This is difference between being safe on the road — or not.
Above are 4 circuit boards from different sellers on eBay/Amazon. On closer look, we found crucial components missing (that's why they cost low) — which reduces functionality, vehicle compatibility and refresh speed. Unfortunately unsuspecting buyers will never know true and total capability of their scanner. You decide: Cheap clone OR the Real thing.
This Total Car Diagnostics ELM327 Bluetooth scanner works on 99.9% of today's cars — yes, even yours.
ELM327 Bluetooth plugs into your car and laptop / phone / tablet — and let's them communicate with each other through OBD software. This Bluetooth also works on any and every OBD app on Google Play store for Android devices — as we thoroughly tested.
Meaning you can diagnose vehicle problems, reset faults, tap into performance statistics — and basically see everything you ever wanted to know about the inside of your vehicle(s).
What's more - our scanner will give you "dealer level" diagnostic power on your vehicle — allowing you to perform advanced diagnostics, health checkups and fault analysis on systems beyond generic OBDII systems of just Engine and Transmission. (Yes, it supports manufacturer systems as long as your OBD software or Android app supports them too. But they all support Engine and Transmission.)
In addition, Total Car Diagnostics ELM327 Bluetooth scanner can read numerous car data/parameters that handheld scan tools can't. Combined with powerful OBD software — you'll be able to read up to 15,000 possible data parameters from you vehicle(s).
Before going forward, please first check that your car is OBD2 compatible. Because this ELM327 interface only works on OBD2 compatible cars. Click here to check car compatibility now. (Your car MUST be OBD2 for this to work.)
- Faster with more stable connections then competitor/clone ELM327 devices: Experience faster screen updates and more graph points.
- Ultra-small scan tool: At just under 2 inches (5cm) long — scanner won’t obstruct driver legroom.
- Hack-Proof: Cutting-edge security scheme virtually eliminates the risk of unauthorized access. Works with 128-bit military grade data encryption, Man-in-the-Middle (MITM) protection.
- Read/Clear MIL (Check Engine light): Check diagnostic codes yourself and make informed and money-saving repair decisions.
- Works on Windows Laptops/Tablets, Mac's and Android Phones/Tablets: Turn your laptop, phone or tablet into a sophisticated diagnostics tool and performance analyst.
- Compatible with absolutely any Android OBD app. (Not compatible with Apple devices. For iOS, get WIFI version).
- Works on a wider range of vehicles: Our scanners advanced algorithm enables it to connect to more OBDII-compliant makes & models than most scan tools on the market.
- The processor is based on Elm Electronics™ ELM327 2.1 code. Doesn't used modified clone-based code as is typically sold.
- Can display sensor data like:
- Engine RPM
- Calculated Load Value
- Coolant Temperature
- Fuel System Status
- Vehicle Speed
- Short Term Fuel Trim
- Long Term Fuel Trim
- Intake Manifold Pressure
- Timing Advance
- Intake Air Temperature
- Air Flow Rate
- Absolute Throttle Position
- Oxygen sensor voltages/associated short term fuel trims
- Fuel System status
- Fuel Pressure
- ...over 4,000 - 15,000 additional values. Too many to list here.
- Bluetooth Range: 5-15 meters. Class 2 Bluetooth transmission with Adaptive Power Control.
- Baud rate: 9600 or 38400
- Indicator LEDs:
Power, OBD, PC (also applies to Phone/Tablet)
- Operating voltage: 12V from cars battery - with internal protection from short circuits/overvoltages
- Nominal idle current: 45mA
- Item Size:
7 x 4.5 x 2.5cm
- Item Weight:
- Operating Temperature: -4º to 131º F (-20º to 55º C)
- Operating Humidity: 10 to 85% (non-condensing)
- Warranty: 1 year. *If Bluetooth stops working or brakes anytime within 1 year of it's usage, simply let us know here — send it back, and we'll send you a new one. Warranty does not apply if it's interface failure is fault of customers actions.
What's Included :
- 1x Genuine ELM327 Bluetooth 2.1 Scanner by Total Car Diagnostics.(Software is not included. That's up to you to get separately. For Windows, we recommend TOAD software).
We're 100% confident that our ELM327 Bluetooth scan tool device is going to work on your car. And that it's all you'll ever need to perform advanced, comprehensive and deep analysis on your vehicle, it's performance and various bottlenecks.
But if for whatever reason this ELM327 Bluetooth reader doesn't work or you're not satisfied with it's performance for whatever cause, we're offering you...
If you're not completely convinced that our ELM327 Bluetooth scantool can help you comprehensively and thoroughly diagnose / read / clear your cars data or error faults... or if you decide ELM327 Bluetooth can't help you save time and money by avoiding expensive car mechanic fees...just let us know 365 days after your initial test-drive of ELM327 Bluetooth Scanner. We'll refund every dollar you've paid. No strings attached.
*Refund Terms: (1) Product is returned in immaculate condition. (2) You must first ask our support for help before returning product. (3) Product must by returned back to Australia. (4) If you're refunding because your vehicle is not OBD2 compatible (meaning you haven't first checked link - hence you're at fault), then we'll minus $7 shipping cost from your refund.
Summary of What You'll Get
When You Order Today...
When you place your order now — you'll get 1x ELM327 Bluetooth scan tool device shipped to your door, anywhere worldwide.
If you live here:
Your product will arrive in:
Australia (+ Tracking)
5 working days
(Tracking via USPS)
5 working days
Everywhere else (+ Tracking)
15-19 working days
Retail Shop Total: $68.00
Online Total: $37 (Free Shipping)
Reason for lower online price is because we have no stock and employee handling fees, like we do in our retail shop. Hence these savings are passed onto you.
Former Lead ECU Software Programmer at Toyota Motor Europe in Brussels, Belgium.
BMW Series-3 Car Engineer at Headquarters at Munich, Germany.
P.S. Is your vehicle supported with this ELM327 Bluetooth scanner? Click here to find out.
Our ELM327 interface goes head-to-head with the fake scan tools on the market — especially those on eBay.
Because there are a lot of phony scan tools out there which are sold at very cheap prices but don't always work as advertised. For example, they have painfully slow data refresh rates. They randomly cut-off connections. And don't work with all vehicle protocols. So you're missing out on lot of valuable data from the car.
All those issues are taken care of in this new v2.1, ELM327 reader. It's fast, reliable and trusted by thousands of professional automotive technicians. It's also backed by our exclusive 1-year warranty.
Get This Genuine ELM327 Bluetooth Scan Tool Today —
It's Faster and More Reliable then Common Clones...